http://santosh-aix.blogspot.com/
https://www.ibm.com/developerworks/mydeveloperworks/blogs/cgaix/?page=1&maxresults=15&lang=en_us
http://unixskylab.wordpress.com/
http://windowspeople.com/
http://gibsonnet.net/aix/
http://wn.com/Ibm_Aix_Operating_System
Articles hints,tips&tricks,howtos and guides related to UNIX System Administration
Thursday, March 31, 2011
Monday, March 28, 2011
Mount USB disk in AIX must be AIX 5.3 TL09 or AIX 6.1 TL02 higher TL
Mount USB disk in AIX must be AIX 5.3 TL09 or AIX 6.1 TL02 higher TL
Configuration:
1. Stick the memory key in the front of the machine
2.
3.
4.
5. Mine look like:
1. Use it
2. If you mounted the drive as a file system don't forget to unmount it.
3. When completely done: rmdev -l flashdrive0 -d to remove the flash device
4. Remove memory key
for further guidelines please refer to
http://www.torontoaix.com/aix-commands/usb_drive
Configuration:
1. Stick the memory key in the front of the machine
2.
cfmgr-- or --
cfgmgr -l usb0
3.
lsdevwill show you new devices flashdriveN (N = 0,1,2 etc)
4.
ls -l /dev/*flash*will show you
/dev/flashdriveNand
/dev/rflashdriveN
5. Mine look like:
root:/tmp# ls -l /dev/*flash*
br--r--r-- 1 root system 36, 0 Feb 12 08:34 /dev/flashdrive0
cr--r--r-- 1 root system 36, 0 Feb 12 08:34 /dev/rflashdrive0
1. Use it
2. If you mounted the drive as a file system don't forget to unmount it.
3. When completely done: rmdev -l flashdrive0 -d to remove the flash device
4. Remove memory key
# lsconf | grep flash
* flashdrive0 U789C.001.DQD3561-D1-T1-L1 USB Flash Drive
# lsdev -Cc flashdrive
flashdrive0 Available 0.2 USB Flash Drive
for further guidelines please refer to
http://www.torontoaix.com/aix-commands/usb_drive
AIX reset root password
1- Insert Media and boot the system.
2- When screen appear / when you hear beep press F1 key till you get SMS menu.
3- Select multiboot. IBM Database 2.1 Server for AIX
4- Select install from.
5- Select CD (If you are installing from CD ) select Install.
6- Select AIX version icon.
7- System console by pressing the F1 key and then press Enter.
8- Start Maintenance Mode for System Recovery by typing 3 and press Enter.
9- Select Access a Root Volume Group ignores the message.
10- Type 0 and press Enter.
11- Select Access this Volume Group and start a shell.
#passwd
Changing password for "root"
root's New password:
Enter the new password again:
# sync;sync;shutdown -Fr
2- When screen appear / when you hear beep press F1 key till you get SMS menu.
3- Select multiboot. IBM Database 2.1 Server for AIX
4- Select install from.
5- Select CD (If you are installing from CD ) select Install.
6- Select AIX version icon.
7- System console by pressing the F1 key and then press Enter.
8- Start Maintenance Mode for System Recovery by typing 3 and press Enter.
9- Select Access a Root Volume Group ignores the message.
10- Type 0 and press Enter.
11- Select Access this Volume Group and start a shell.
#passwd
Changing password for "root"
root's New password:
Enter the new password again:
# sync;sync;shutdown -Fr
Saturday, March 26, 2011
Links
1- http://www.ahinc.com/
2- http://radek-it.blogspot.com/
3- http://www.digilife.be/quickreferences/quickrefs.htm
4- http://www.tablespace.net/quicksheet/aix-quicksheet.pdf
5- http://www.tablespace.net/
6- http://www.ivorde.ro/Server_Operating_Systems/
2- http://radek-it.blogspot.com/
3- http://www.digilife.be/quickreferences/quickrefs.htm
4- http://www.tablespace.net/quicksheet/aix-quicksheet.pdf
5- http://www.tablespace.net/
6- http://www.ivorde.ro/Server_Operating_Systems/
HMC key combintaions quated from http://radek-it.blogspot.com/
CTRL-ALT-F1: Switch to Linux command line; no login possible. If you then click on CTRL-ALT-DEL the system will reboot.
CTRL-ALT-F2: Takes you back to the Xserver window.
CTRL-ALT-BACKSPACE: Kills of the Xserver and will start a new -fresh- one, so you can login again.
CTRL-ALT-F2: Takes you back to the Xserver window.
CTRL-ALT-BACKSPACE: Kills of the Xserver and will start a new -fresh- one, so you can login again.
Trouble TSM connections
Link : http://publib.boulder.ibm.com/tividd/td/TSMM/SC32-9103-01/en_US/HTML/comm_err_adm_ctr.html
Verify the TSM port is correct
Check to see what port the TSM server is using. You can issue the QUERY OPT TCPPORT command on the server to determine the server port.
Make sure the port used in the Administration Center is the same port the server is running on. Go to the directory where the administrative client is installed. Then issue dsmadmc with parameters matching those in the connection settings for the Administration Center. This command can also be issued from the server console.
Verify the TSM port is correct
Check to see what port the TSM server is using. You can issue the QUERY OPT TCPPORT command on the server to determine the server port.
Make sure the port used in the Administration Center is the same port the server is running on. Go to the directory where the administrative client is installed. Then issue dsmadmc with parameters matching those in the connection settings for the Administration Center. This command can also be issued from the server console.
dsmadmc -id=-pass= -tcpport= -tcps=
tsm: SERVER1>QUERY OPT TCPPORT
Server Option Option Setting
----------------- --------------------
TCPPort 1500
tsm: SERVER1>
Disabling undesired TCP/IP services in AIX
Disabling undesired TCP/IP services in AIX
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD100942
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD100942
Viewing All Users and Tasks from HMC Command Line
Viewing All Users and Tasks from HMC Command Line
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD105422
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD105422
Hardening AIX
Link : http://www.boran.com/security/sp/aix_hardening.html
Link : http://www.ibm.com/developerworks/aix/library/au-security_cmds/index.html
Link : https://www-304.ibm.com/support/docview.wss?origin=pSeriesTechnicalBulletin&rs=111&uid=isg3T1010741&context=SWG10
Link : http://www.ibm.com/developerworks/aix/library/au-security_cmds/index.html
Link : https://www-304.ibm.com/support/docview.wss?origin=pSeriesTechnicalBulletin&rs=111&uid=isg3T1010741&context=SWG10
Increase AIX 5.3 password length ( TL must be 7 and upward )
Link 1 : https://www-304.ibm.com/support/docview.wss?origin=pSeriesTechnicalBulletin&rs=111&uid=isg3T1010741&context=SWG10
Link 2: https://www-304.ibm.com/support/docview.wss?origin=pSeriesTechnicalBulletin&rs=111&uid=isg3T1010741&context=SWG10
Password length and encryption algorithms
http://www.redbooks.ibm.com/redbooks/pdfs/sg247559.pdf
Link 2: https://www-304.ibm.com/support/docview.wss?origin=pSeriesTechnicalBulletin&rs=111&uid=isg3T1010741&context=SWG10
Password length and encryption algorithms
http://www.redbooks.ibm.com/redbooks/pdfs/sg247559.pdf
Determine the process running on a particular port
Determine the process running on a particular port
Link : http://www-01.ibm.com/support/docview.wss?uid=swg21457869&myns=swgtiv&mynp=OCSSBSEX&mynp=OCSS8JB5&mync=E
Link : http://www-01.ibm.com/support/docview.wss?uid=swg21457869&myns=swgtiv&mynp=OCSSBSEX&mynp=OCSS8JB5&mync=E
netstat -Aan | grep
Storage Links
Links for some useful blogs
1- http://www.storagewisdom.com/?tag=ds8000
2- http://www.storagewisdom.com/?tag=ds8000
3- http://publib.boulder.ibm.com/infocenter/dsichelp/ds8000ic/index.jsp?topic=%2Fcom.ibm.storage.ssic.help.doc%2Ff2c_cmnrelatedinfo_1sktr6.html
4- http://www.nasi.com/IBM_DS8000.php
5- https://storagebuddhist.wordpress.com/
6- http://rogerluethy.wordpress.com
1- http://www.storagewisdom.com/?tag=ds8000
2- http://www.storagewisdom.com/?tag=ds8000
3- http://publib.boulder.ibm.com/infocenter/dsichelp/ds8000ic/index.jsp?topic=%2Fcom.ibm.storage.ssic.help.doc%2Ff2c_cmnrelatedinfo_1sktr6.html
4- http://www.nasi.com/IBM_DS8000.php
5- https://storagebuddhist.wordpress.com/
6- http://rogerluethy.wordpress.com
Thursday, March 24, 2011
List all users in aix in a formatted output
To list all users in formatted output
lsuser -c -a id home ALL | sed '/^#.*/d' | tr ':' '\011'
Wednesday, March 23, 2011
Monday, March 21, 2011
TSM : Show Reclaimable Volumes
TSM SQL statment to get reclaimable volumes
select stgpool_name,volume_name,pct_utilized,access,pct_reclaim,status from volumes where stgpool_name in (select stgpool_name from stgpools) order by 1 asc,3 asc
Tuesday, March 15, 2011
System CFG in AIX
Get System Memory in AIX
Get System Processor Speed
Get System kernel in use
bash-3.2$ prtconf -m
Get System Processor Speed
bash-3.2$ prtconf -s
Get System kernel in use
bash-3.2$ prtconf -k
Monday, March 7, 2011
Get number of by state tape in TSM
SELECT COUNT(*) FROM libvolumes WHERE status='Scratch'
SELECT COUNT(*) FROM libvolumes WHERE status='Private'
SELECT COUNT(*) FROM libvolumes WHERE status='Private'
Subscribe to:
Posts (Atom)